HK225

10 Frame Comb Honey Super Kit

$154.50

Expected ship date is May 31, 2024

QTY

Product Details

Description

Making comb honey has never been so easy! Our assembled 10 Frame Comb Honey Kit comes with an assembled 5-5/8" (14.29 cm) super and 5-3/8" (13.65 cm) frames (wedge top bar). All you need to do is insert the sheets of thin surplus 4¾" x 16½" (11.12 cm x 41.91 cm) beeswax foundation along with the ⅝" (1.59 cm) wedge nail. Our Comb Honey Kit comes with Lloyd Spear's Comb Honey Basics Booklet to give you all the information you need to know about comb honey. To complete our Comb Honey Kit we will also send you our Stainless Steel Comb Cutter for cutting chunks of honey that can then be packaged in the clamshell boxes you will receive. It's as easy as 1, 2, 3! 1 5" (14.29 cm) Assembled Shallow Super10 5 (13.65 cm) Assembled Frames (wedge top bar)10 Thin Surplus 4¾" x 16½" (12.07 cm x 41.91 cm) Foundation Sheets 1 Comb Cutter40 Clamshell Boxes 1 Comb Honey Basics Booklet (Lloyd Spear) ⅝" (1.59 cm) Wedge Nails Click here for instructions on the 10 Frame Comb Honey Super Kit.

Specification

  • 12.21 LBS

Reviews

  • 3

    Honeycomb super

    by Robert R Weisensee on May 13, 2022

    I like all that it comes with, but the only problem I had was the foundation falls out in the heat.

  • 3

    Pros and cons

    by Randall Muir on Apr 20, 2022

    This kit has things going for it, but also would be better if foundation installation guidance was included. I have no experience assembling 100% beeswax foundation into frames. The kit includes a booklet written by a master, but he goes into a bunch of wide ranging subjects like swarm prevention. He makes no mention of the details needed to get the wax foundation in the frames. The instructions that Mann Lake provided only tell you how to assemble the frames. That was kind of ridiculous since the kit comes with pre-assembled wooden frames. I had to go to YouTube to confirm you’re supposed to use your hive tool to snap the pre-cut wedge off the underside of the top bar first. Since the height of each wax panel is about a quarter inch more than the space from the very top of the top groove to the very bottom of the bottom groove, I was uncertain if the wax panel was oversized, or if I was supposed to trim it. Otherwise it would bow when installed. I ultimately figured out on my own to bend over about 1/4 of an inch of the top of the wax foundation as you were installing it and then put the wedge over top of that roughly 90° angle you created in the wax. This was the most important information to be included in assembly instructions, and it was nowhere to be found. Obviously a beekeeper experienced with installing 100% beeswax foundation would know why the wax is a little bit taller than the space and what to do. Now I have an installation strategy also, but I had to come about it the hard way.